*Please add required m² or pieces required to the cart
ABOUT ZANZIBAR STACKSTONE WALL CLADDING
Eye catching Zanzibar Sandstone Stack Stone light weight wall cladding is a new addition to our stackstone family. To achieve this colour enhanced look you must apply our colour enhancing sealer.
Easy to install for all you DIYers out there. We even have natural looking 2-Piece interlocking corners, to make your job look professionally finished.
Tiles are 595x150x10-18mm with matching corner pieces 400/20x150x12-15mm
We deliver stackstones door-to-door to all suburbs in Melbourne, Canberra, Sydney, Adelaide, Brisbane, and Hobart. We also deliver to any regional area in Australia at reasonable freight rates.
Zanzibar Stackstone Wall Cladding is a perfect choice for…
For more information feel free to give us a call on 03 9706 9767 or Talk to one of our experts and get a FREE Quote.
Sizes
Flats 595x150mm $59m², 400/200x150mm $4.75 Per Piece (Corner Set of 2)
Installation Guidelines
We recommend that you grade the pavers into 2-3 thickness groups prior to installation. This is easily done as you are taking the tiles out of the crates and will also mix any variations in colour through the job from different crates.
15mm is recommended to be ONLY layed in a rapid setting adhesive and please use a 6mm trowel as follows…. Notch out 6mm of adhesive on the slab and 6mm cross notched on the back of each tile. Also please lay in BRICK or STRETCHER BOND patterns and allow for a 8mm minimum grout joint to allow for any tile variations in length or width. DO NOT ACID WASH your pavers.
Sealing
Bluestone tiles and pavers can be sealed as a peace of mind to ensure bluestone stays in pristine condition. It’s highly recommended particularly in areas where there may be high spillage to protect the lustre of the bluestone tiles and pavers.
If you choose not to seal your tiles, make sure you clean up spills immediately to avoid staining the tiles. Use only a penetrating invisible type sealer (no colour change) similar to Tasman Chemicals STONE SHIELD and ALWAYS follow the sealer manufacturers instructions when applying. We stock a FULL range of suitable sealers.
Cleaning
Do not use Hydrochloric acid for clean up as this can cause minerals present in the stone to react adversely.To clean prior to sealing simply pressure wash the stone and ensure nozzle is never closer than 300mm to the surface of the stone.
Maintenance
Just sweep when needed. Bluestone responds well to high pressure cleaning with a domestic machine, please keep the nozzle about 300mm minimum away from face of the bluestone pavers and tiles. A solution of mild detergent and water can be applied prior to pressure cleaning.
Australia's Largest Range
Free Express Posted Samples
Book a Free Design Consultation
Easy Australia Wide Delivery